MONEL 400 ROUND BAR

MONEL 400 ROUND BAR MANUFACTURER

The Apexia Metal Is Most Reliable Supplier of Monel Round Bar. 2.4360 Monel 400 Flat Bar, ASTM B164 Monel 400 Alloy Triangle Bar Distributor. Nickel 400 Amalgam Bar, Monel 4400 Bar

Nickel Copper Alloy 400 Monel 2.4360 Cold Drawn Bar is essentially immune. to the stress-related consumption breakage of chloride particles. when presented to destructive media under normal conditions.

Another important note to note is that this Monel UNS N04400 Nickel Alloy Square Bar is attacked. under conditions containing sulfur-containing gases in a temperature range. that falls above around 700 ° F. Essentially. liquid sulfur attacks the Monel UNS No4400 rectangular bar in conditions. where the temperature can exceed 500 ° F around.

Even though Monel 400 Grade Cold Finished Bar offers something very similar. or comparative protection against consumption like nickel. suppliers of Monel 400 round bars are leaning towards this compound. because Monel 400 Nickel hex bars. have a much higher working pressure factor. and temperatures. that are also at a lower cost, which can be attributed to its better than machining capacity.

Monel N04400 hot rolled bar can be welded. without much stretching by any of the accompanying techniques. for example gas-tungsten curve strategy, gas metal circle segment measurement. or shielded metal bending procedure. Weld measurements directed at Monel UNS 4400 spring steel bar are often made using. suitable filler metals. There is no requirement for fabricators to perform post-weld heat. treatment on Monel Grade 400 forged bar. However, thoroughly cleaning ASTM B164 Alloy 400 bar is an order after welding activities. as it is basic to the ideal opposition to consumption. In any case, not cleaning the Amalgam Nickel Round Bar 400 can create a risk of contamination. and brittleness within the metal.

MONEL 400 ROUND BAR , MONEL 400 ROUND BAR  MANUFACTURER, MONEL 400 ROUND BAR MANUFACTURER IN INDIA, MONEL 400 ROUND BAR  SUPPLIER, MONEL 400 ROUND BAR  SUPPLIER IN INDIA

MONEL 400 ROUND BAR MANUFACTURER IN INDIA

Monel 400 Round Bar Specification

Details: ASTM B164, AMS 4730, AMS 4675, AMS 4731

Monel 400 Specifications: ASTM B164, ASME SB164, UNS N04401

Global Specifications: DIN 17753, QQ-N-281, BS3076NA13, VdTUV 263

UNS N04400

ASTM B164

AMS 4675

AMS 4730

ASM 4731

QQ-N-281

BS3076NA13

Concussion 17753

VdTUV 263

Monel 400 Grade – UNS N04400, Nickel Alloy 400 (66 Ni / 34 Cu)

ASTM B164 UNS N04400 Specification

ASTM, ASME, API, GB, AISI, DIN, EN, SUS, UNS standard

400 Combination Round Bar Size Diameter: 3- ~ 800mm

400 Monel Hex Bar size 2-100mm A / F

Monel Alloy 400 Flat Bar Size Thickness: 2-100mm

Width: 10 to 500 mm

400 Monel Alloy Square Bar, Size 4 to 100mm

Monel 400 Angle bar size (in mm) 3 * 20 * 20 ~ 12 * 100 * 100

ASTM B164 Monel 400 Section 3.0 to 12.0 mm thick

Monel WERKSTOFF NR. 2.4360 Channel bar (in mm) Segment from 80 x 40 to 150 x 75; 5.0 to 6.0 thick

Nickel Alloy Hollow Bar 400 (in mm) 32 OD x 16 ID to 250 OD x 200 ID)

2.4360 Monel 400 Billet Size 1/2 “to 495mm diameter

ASTM B164 400 Monel Rectangles Size 33 x 30mm to 295 x 1066mm

400 Monel Round Bar Finish Cold drawn (splendid), centerless ground. hot rolled, smooth turning, peeled, cut moved edge, hot moved hardened, rough turned. bright, polished, ground, centerless ground, and black

Amalgam Monel 400 Round Bar Surface Glossy. Hot Rolled Pickled, Cold Drawn, Sandblasted Finished, Polished, Hairline

Monel 400 round bar Condition Hardened and tempered, tempered

400 Monel Bar Technique Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod

Monel 400 Din 2.4360 Round bar tolerance H8. H9, H10, H11, H12, H13K9, K10, K11, K12 or according to the customer’s prerequisite

UNS N04400 Monel Bar Processing Bar Cutting to 650mm

 

Our Monel Alloy 400 round bar conforms to NACE MR0175 / ISO 15156

Monel® 400 composite rod,

Diameter: 3.0mm, Temper: Annealed

400 Monel® amalgam rod,

Diameter: 6.35mm, Temper: As Drawn

400 Monel® amalgam rod,

Diameter: 12.7mm, Temper: As Drawn

400 Monel® amalgam rod,

Diameter: 20mm, Temper: Annealed

Amalgam rod 400 M

MONEL 400 ROUND BAR , MONEL 400 ROUND BAR  MANUFACTURER, MONEL 400 ROUND BAR MANUFACTURER IN INDIA, MONEL 400 ROUND BAR  SUPPLIER, MONEL 400 ROUND BAR  SUPPLIER IN INDIA

MONEL 400 ROUND BAR SUPPLIER

Compound 400 is essentially invulnerable to the chloride-related particle. stress erosion failure under average conditions. Despite the very fact that its erosion clogging is impressive under reducing conditions.

it is considered poor under oxidative conditions. Monel 400 Hex Bar is of no value in corrosive oxidative conditions, eg nitric. and nitrous corrosive. Additionally, this nickel-based amalgam is etched under conditions. where sulfur-containing gases are present at a temperature of around 700 ° F or higher. Similarly, liquid sulfur attacks the 400 mixture at temperatures above about 500 ° F.

Monel 400 Rod is known to possess incredible mechanical properties. even at sub-zero temperatures. Amalgam is often used in temperatures up to 1000 ° F. Monel 400 exhibits a high dissolution point. softens between the 2370 ° F – 2460 ° F temperature range. Since the 400 combination has low resistance. during a hardened condition, an assortment of treatment methods. could be used to expand the stiffness.

Despite the very fact that Monel 400 bar stock tends to offer very similar. or comparable consumer opposition to plain nickel, the best working press factor. and best-achieved temperatures are high. Apart from this. the compound is considered cost-effective due to its better capacity.

than typical uses for ASTM B164 Monel 400 forged bar include industrial heat exchangers. marine design, oil stills, oil refining towers, water radiators Boiler feed. and other heat exchangers, Air recirculation through radiators. Chlorinated solvents, Gasoline, and freshwater tanks, Chemical and hydrocarbon preparation equipment

Monel 400 can be welded without much stretch using strategies. such as gas-tungsten circle segment, metal-to-gas curve, or shielded metal curve. Furthermore, the amalgam must be handled using suitable filler metals. Even though no post-weld heat treatment is necessary. the amalgam must be thoroughly cleaned after welding. Post-weld cleaning is basic to accumulate ideal

MONEL 400 ROUND BAR SUPPLIER IN INDIA

400 Combo Round Bar Specification

UNS N04400

ASTM B164

AMS 4675

AMS 4730

ASM 4731

QQ-N-281

BS3076NA13

Concussion 17753

VdTUV 263

Determinations: ASTM B164, AMS 4730, AMS 4675, AMS 4731

Monel 400 Specifications: ASTM B164, ASME SB164, UNS N04401

Global Specifications: DIN 17753, QQ-N-281, BS3076NA13, VdTUV 263

ASTM B164 UNS N04400 Specification

Monel 400 Grade – UNS N04400

Monel 400 Bar Stock Size (round) Diameter: 3- ~ 800mm

Monel 400 Flat bar size Thickness: 2 – 100 mm

Width: 10 to 500 mm

Monel 400 2-100mm A / F Hex Bar Size

Monel 400 Angle Bar Size 3mm * 20mm * 20mm ~ 12mm * 100mm * 100mm

Monel 400 square bar size 4 to 100 mm

3.0 to 12.0 mm thick section

Channel bar Monel 400 Segment from 80 x 40 mm to 150 x 75 mm; 5.0 to 6.0 mm thick

Monel 400 Billet Size 1/2 “to 495mm diameter

Monel 400 hollow bar 32mm OD x 16mm ID to 250mm OD x 201mm ID)

Monel 400 Rectangles Size 33 x 30mm to 295 x 1066mm

Monel 400 round bar Standard Dimensions Diameter / Height:

Finish Centerless Grinding, Cold Drawn (Splendid), Smooth Turning. Hot Rolling, Cut Driven Edge, Peeled, Rough Turning, Bright, Hot Rolled Tempered. Grinding, Polishing, Centerless Grinding, and Black

Hot rolled surface Pickled, glossy, sandblasted, cold drawn, hairline, polished

Tolerance H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or consistent with customers’ prerequisites

Monel 400 Technique Cold drawn, hot rolled, forged round bar, cold-rolled, rod

Condition Hardened and tempered, reinforced

Monel 400 round bar processing bar cutting to 650mm

I / H shape bar, forging, precision ground bar. channel bar, square, flat bar, round bar, blocks, hollow, rings. triangle, rectangle, hexagonal (A / F), round, threaded, rod. semicircular bar, T-Bar, Billet, Profiles, Ingot, then forward

 

Our Monel 400 round bar conforms to NACE MR0175 / ISO 15156

Monel 400 round bars

ASTM B164 Monel Alloy Bright Bar, Monel DIN 2.4360 Hex Bars, 400 Monel Alloy Finished Bars.

About

We are one of the leading manufacturers of optimum quality Pipes & Pipe Fittings. Their high tensile strength, seamless finish and resistance to corrosion, make these pipes highly demanded.

Register Office

Office No. 14, New Hira Building, 1st Parsiwada Lane, Girgaon, Mumbai – 400004, Maharashtra, India

Contact

(+91) 7977916074
(+91) 9167472806
apexiametal@gmail.com
export.apexia@gmail.com

Copyright 2021 © Apexia Metal – All Rights Reserved || Developed & Maintained by Adsense Networks