MONEL 5 WAY MANIFOLD
MONEL 5 WAY MANIFOLD MANUFACTURER
The Apexia Metal Is Planned and made hooked to ASTM / DIN / BS. and other important standards depending on the customer’s prerequisites.
Material:
Made of produced stainless steel – ASTM A 479. ASTM A182 F304, ASTM A182 F316, ASTM A182 F304. ASTM A182 F304L, steel – ASTM A 105, Monel, Inconel, Hastelloy, Titanium, others on request. Material with NACE consistency is accessible.
The organ fixation courses of action were used. generally, change with the need for temperature. the best known is PTFE for temperatures up to 180 ° C despite temperatures. above 180 ° C to 270 ° C, graphitized asbestos can be a typical organ seal. Beyond 270 degrees C and up to 540 degrees C, graphic is often advertised.
Test / Certificates: Certificate of conformity. the test statement, material test authentications, 3.1 MTC, 3.2 MTC. PMI, NACE-MR-01-75 and NACE-MR-0103, Hydrotest, then accessible.
Types:
Remote mounted manifolds
Direct mount “T” type manifolds (pipe to flange)
Direct mount “H” type manifolds (flange to flange)
Coplanar manifolds
The manifolds offer a safe and economical establishment technique to regulate. and quantify the pressure factor of fluids and vaporous media.
They are practically introduced to regulate, isolate, calibrate, measure. and equalize the drain or separate the pressure factor of fluids and gases. These collectors are difficult to develop to cope with high-pressure factors. and temperatures. These valve manifolds consolidate the climate of a tee. adjusting valve, isolation valve. and all tubing and fittings into a single conservative unit. thereby reducing the number of fittings and space required for setup.
MONEL 5 WAY MANIFOLD MANUFACTURER IN INDIA
MONEL 5 WAY MANIFOLD
The 5-valve manifolds are comprised of two segregated, 2-channel, equalizer valves.
The 5-valve manifolds are designed for separate or distant mounting. Interface from measurement side 1/2 “NPT (F) and. instrument side 1/2” NPT (F) Connection of frame motivation lines and transmitters. with a simple five-valve design. takes into account two simple ones impediments or isolation. two, one Vent valve setting of verification or static pressure factor transmitter.
Specialized Specifications:
2-way, 3-way, 5-way types
Working pressure: 6000 psi and better
Standard: Designed and manufactured to regulate API / BS / DIN STANDARD
End Connections: ¼ “and ½” Associations with BSP, NPT, BSPT
Organ seat: Standard P.T.F.E
Body: One-piece forged CS A 105 silver, ASTM A 182 F 316 SS, ASTM A 182 F 304 SS, Monel, and Hastelloy.
Maximum temperature: – 20 degrees C to + 230 degrees C depends on various materials.
Material: SS316, SS304, CS, Hastelloy. Monel then in
Activity – Pneumatic Controlled – Smooth, Easy, Low Torque, Long Life
Quality – The highest standard for visuals, materials, dimensional accuracy, performance, leak tightness
Testing: Each valve is 100% tested to ensure leakage is tight on the housing, seat, and gland.
Application industries: Petrochemical, Energy, Thermal, Refineries, Fertilizers, Chemical, Pharmaceutical
COPLANAR 5 VALVE MANIFOLD
Coplanar 5-valve manifold
MONEL 5 WAY MANIFOLD – CoplanarTM Style Manifolds. are designed for direct mounting to Rosemount 2051/3051 CoplanarTM Pressure Transmitters. the quality vent association is 1/4 female NPT. Line plugs are not introduced as standard.
A variety of options are accessible. and therefore the corresponding trims, see under Mounting Bracket & Accessory Kits.
MONEL 5 WAY MANIFOLD SUPPLIER
Instrumentation 5-way manifold valve specification
Kind:
5-way manifold valves
Work pressure:
6000 psi and better
Standard:
Planned and made to regulate API / BS / DIN STANDARD
Final connections:
¼ “and ½” Associations with BSP, NPT, BSPT
Organ seat:
Standard P.T.F.E
Maximum temperature:
– 20 degrees C to +230 degrees C are based on various materials
Material:
SS316, SS304, CS, Hastelloy. Monel then go-ahead
Activity:
Pneumatically controlled: smooth, easy, low torque, long life
MONEL 5 WAY MANIFOLD SUPPLIER IN INDIA
Quality:
The best quality in visuals, materials, dimensional accuracy, operation, leak adjustment onwards
Application industries:
Refineries, liquid petroleum gas preparation plants. petroleum compounding plants. structures difficult to cut due to strong substance dust, rust, earth and then in
Tests:
• Each valve is 100% tested to ensure spillage is tight in the housing, seat, and gland.
Reflexes:
• Our complex valves are made up of 1/2 “NPT (F) connections.
• Pipe-to-column or rib-to-rib pipe associations are provided.
• One compensating valve, two square valves, and a pair of n.
• To cope with high temperature and press factor, we use Grafoil to press at 10,000 F and 6000 PSI pressure.
• The test was completed using water according to MSS-SP-61. that is, the body was tested 1.5 times with a working pressure factor. and the seat was tested 1.1 times with a working pressure factor.
5 valve manifolds
The manifolds are fittings. that associate a minimum of two valves of a water-driven structure.
A variety of square/release valves are often consolidated. during a lone body arrangement. all these valves have a different opening underneath to associate a line. The main body of the valve chamber is normal for all or some.
These manifolds typically incorporate a ball, drain, needle, and vent valves. Its use generates investments in terms of space and establishment costs.
Instrument valve manifolds 5
Manifolds are gears that interconnect a minimum of two valves. in a pressure-driven structure.
A variety of square / confined valves are often joined together during a lone body design. all those valves have a different opening underneath to interconnect a line. The main body of the valve chamber is normal for all or some.
These manifolds typically incorporate a ball, drain, needle, and vent valves. Its use generates investments in terms of space and establishment costs.
Monel 400 / K500 instrumentation valves offer rare highlights such as high strength. high weldability, even with excellent resistance to consumption. This compound has a set of mechanical properties at low temperatures. Monel K500 gate valves arrive in a variety of sizes and details. Instrumentation valves of this grade find their application in marine. composite and various mechanical regions. Our UNS N04400 quarter-turn plug valves can also be remade according to customer needs.
The Monel 400 / K500 Instrumentation Valve offers extensive highlights:
• Resistance to carbonization
• Opposition to high temperatures
• Opposition to oxidation
• Good mechanical properties at low temperatures
• Physical properties
• Great resistance and toughness
Determinations
Determination: ASTM B 163, B730 / ASME SB163, B730
Measurement: ASTM, ASME, and API.
Size range: 1/8 “to 16”
Type: Seamless / Fabricated / LSAW / ERW Tubes / Welded
Grades: Monel 400 (UNS No. N04400), Monel K500 (UNS No. N05500)
Specification of Grade 400 / K500 Monel Alloy Instrumentation Valves
Specifications ASTM A494 / SA494 API 600 / BS1414, API 598 / BS EN 12266-1, ASME B 16.10, ASME B 16.5, ASME B 16.25, ASME B 16.34
Dimensions ASTM, ASME API
Pressure factor Rating 150 #, 300 #, 600 #, 800 #, 1500 #
Size 1/8 “to 16”
End Connection Screwed [NPT], Socket Welded, Flanged End, Parallel Screwed, Tapered Screwed
Grades Monel 400 (UNS No. N04400), Monel K500 (UNS No. N05500)
About
We are one of the leading manufacturers of optimum quality Pipes & Pipe Fittings. Their high tensile strength, seamless finish and resistance to corrosion, make these pipes highly demanded.
Register Office
Contact
(+91) 9167472806
apexiametal@gmail.com
export.apexia@gmail.com
Follow
Copyright 2021 © Apexia Metal – All Rights Reserved || Developed & Maintained by Adsense Networks
