Stainless Steel 2 Way Manifold Valve
Stainless Steel 2 Way Manifold Valve Manufacture
The Apexia Metal Is Provide Manifolds are hardware. that interconnects a minimum of two valves in a water-powered structure.
A variety of square / insulated valves are often joined together during a solo body setup. all those valves have a different opening underneath to interconnect a line. The main body of the valve chamber is normal for all or some.
These manifolds typically incorporate a ball, drain, needle, and vent valves. Its use generates reserve funds in terms of space and establishment costs.
2-valve instrumentation manifold
The manifolds are fittings that associate. a minimum of two valves of a water-driven structure.
A variety of square / spaced valves are often consolidated during a solo body setup. all these valves have a different opening underneath to associate a line. the elemental body of the valve chamber is normal to all or some.
These manifolds generally incorporate a ball, drain, needle, and vent valves. Its use generates investments in terms of space and establishment costs.
Instrument 316SS 2 Valve Block and Purge Manifold
General highlights
* Simple maneuverability of the T-bar with minimal effort
* PFTE pressing standard, graphite discretionary
* stainless steel development as standard
* Useful color-coded recognizable proof
* Externally movable organ
* type of final associations
* Dust Cap to prevent impurities on the work rope
Stainless Steel 2 Way Manifold Valve Manufacture in India
316 Stainless Steel 2 Way Manifold Valve Temperature Rating
Temperature classification 426ºC
Reflexes :
It is used in Calibra.
We use 316 Stainless Steel 2 Way Manifold Valve for unmatched opposition to consumption.
To withstand high temperature and crimp factors, we use Grafoil as a crimp at 10,000F and 6000 PSI pressure.
The two-valve complex allows for simple disconnection of state-of-the-art instruments and. its conservative design reduces the number of accessories.
Press factor rating Up to 6000 PSI at 2000F or 4000 PSI at 5000F with PTFE press.
The hydraulic test is performed using water compatible with MSS-SP-61. The valve body is tested 1.5 times the working pressure factor and. the seat overflow is tested 1.1 times the working pressure factor.
Stainless Steel 2 Way Manifold Valve
Type Model No
The line to pipe 2 way – R
The line to flange 2 WAY – T
Rib to flange 2 WAYS-H
2-Way Line-to-Pipe Remote Mount – RM
Hat assembly
Hat: confirmation of victory located on the back.
Shaft: ground and coiled rope. Pressing under the rope.
Shaft tip: non-pivoting tip lock type and delicate location.
Debris Cap – Dust Cap protects stem. strings from heat code discernibility of exterior contamination.
Specialized Specification: –
Size: 1/4 ″ and 1/2 ″ and 3/4 ″
Accessible custom size according to need
End connection: NPT, BSPT, BSP, and Socket Weld.
Working pressure: 6000 psi (413 bar)
Temperature Rating: PTFE 450 ° F (232 ° C) Grafoil 700 ° F (371 ° C “)
Discretionary aggressive gas management valves are accessible by claiming nace mr-01-75
Stem packing: PTFE, Grafoil.
Hole: ø4.7
All valves are 100% plant tested before shipment.
Manifold Valves Standard Specifications: –
Highest working pressure factor: 413 bar / 6000 PSI at 100 C
Material: 316 stainless steel / 316L stainless steel / 304 stainless steel / carbon steel
Monel, Inconel, Hastelloy, duplex steel are also accessible on demand.
Pressing of organs: PTFE / Graphite
Standard Interaction Association: ½ “NPT F
Standard Instrument Association: Flange
Channel: ¼ “NPT F (provided with ¼” NPT glare plug)
Stainless Steel 2 Way Manifold Valve Supplier
The 2-way manifold valve takes into consideration the single square, drain. and setting of a transmitter or static pressure factor check. The manifold valve is accessible with metal seats or replaceable delicate seat inlays. and is available in 316 hardened steel for ideal consumption clogging. The manifold valve has stems that highlight a non-pivoting top. with an effectively replaceable delicate shim. The 2-way manifold valve is equipped with a ½ “female NPT to ½” female NPT association.
Two-way manifold valve key features
A simple 2-valve setup considers a simple square. drain, and setting of a transmitter or static pressure factor measurement
Accessible with metal seats or replaceable delicate seat inlays
Association: ½ “female NPT to ½” female NPT
Development of the body of a high resistance piece. for well-being without the need for welding.
The stems include a non-rotating cap with an effectively replaceable delicate insert.
The safety pin prevents inadvertent disassembly of the valve.
Hardened 316 steel development for unmatched resistance to consumption.
The hat-to-body seals are metal-to-metal, without using o-rings.
The mounting openings were adapted for self-supporting applications.
100% pressure factor tested for closure and minimum seals.
The collectors stand out with a 4: 1 safety factor.
Stainless Steel 2 Way Manifold Valve Supplier in India
Manifold valve elements incorporate pressure factor isolation. gauge leveling, exhaustion and venting, and care is dependent on the type
Stainless Steel 2 Way Manifold Valve, type R, remote mount
Stainless Steel 2 Way Manifold Valve, T-type, direct mount, one-side flange
Stainless Steel 2 Way Manifold Valve, type H, direct mount, flanged on both sides
Development of bar material
Cover with recognizable proof shading
The metal-to-metal seal from the hood to the body seat eliminates the need for O-ring seals.
Handle metal T-bar (standard) or optional plastic roundabout.
Double hood or single hat (optional)
Standard highlights include:
Metal-to-metal fundamental valve seat
The needle that does not rotate
Cold moved outer stem cords
Metal-to-Metal Auxiliary Needle Seal (Sub saloon)
Victory Verification Needle
All non-wetted parts are 316 treated steel
Essential valve seat
Non-pivoting needle
Outer stem rope
Victory Verification Needle
Metal-to-metal rear seat arrangement
Lockplate to eliminate unapproved ejection from the hood
Essential valve seat
Non-pivoting needle
Outer stem rope
Victory Verification Needle
Metal-to-metal rear seat layout
Locking pin to eliminate unapproved ejection from the hood
FKM O-Ring Needle Seal
RGD (Rapid Gas Decompression) Safe
It is by the needs of TA-LUFT 2002
Valve seat required
The needle that does not rotate
Outer stem rope
Victory Confirmation Needle
Metal-to-metal secondary room
Pressing cups and cones
Locking pin to require unapproved ejection of the hat
Valve seat required
The needle that does not rotate
Outer stem rope
Victory Verification Needle
Metal-to-metal rear seat arrangement
Despite this well-being ability, the introduction. of a latch prevents the AT-Key from embedding itself in the key aid. Working the valve is not, at this time conceivable, to secure. its hardware against unapproved opening and closing
this article in various details so that the various needs of recent applications can be met. The element forms accessible in an alternate plane, sizes. final associations, flow design, associations, working pressure factor, temperature classification.
Oil, gas, and water media
Medium temperature Medium temperature
Activity mode Manual, electric actuator, pneumatic
Size range from 1/8 to 1 “, accessible custom sizes
Design Integral hood design, forged body with inline/straight or angled pattern
3A / ISO / DIN / SMS / ASTM / JIS standard
Manufacturer’s brand OS-LOK
Package details PVC package, wooden case or according to customer’s prerequisite.
Spill rate
Delicate seal: zero spillage, 100% leakproof
Hard seal ≤ nominal flow 10-5
Working pressure factor
Up to 6000 PSIG
Hardened Steel Manifold Valves – Up to 6000 psig (414 bar)
Steel Manifold Valves – Up to 3000 psig (207 bar)
Metal Manifold Valves – Up to 3000 psig (207 bar)
Complex valves are also accessible with a higher pressure factor
Seal ring material PPL, PTFE, PPL Soft Graphite
Assembly process Forged bar stock
OEM Service Yes
Association
End of chain
Weld end
Cylinder end
Simple ferrule
Two bushings (double bush)
Twin ferrule
Power manual
End connection
Male and female TPN
BSPT
Fixture Welding (SW)
Double ferrule tube connections
Male to female
Female to Female Valve Producers
Temperature range
About
We are one of the leading manufacturers of optimum quality Pipes & Pipe Fittings. Their high tensile strength, seamless finish and resistance to corrosion, make these pipes highly demanded.
Register Office
Contact
(+91) 9167472806
apexiametal@gmail.com
export.apexia@gmail.com
Follow
Copyright 2021 © Apexia Metal – All Rights Reserved || Developed & Maintained by Adsense Networks
